
The 5th China International Symposium on Tribology (CIST 2008), conjugated with the 1st International Tribology Symposium of IFToMM (ITS - IFToMM 2008), was held from September 24 to 27, 2008 in Beijing, China. The symposium was jointly organized by the State Key Laboratory of Tribology (Tsinghua University), the State Key Laboratory of Solid Lubrication (Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences), and the Tribology Institution of Chinese Mechanical Engineering Society. Increasing activities in the area of tribology of academia and industry in recent years were discussed during the symposium. Overall, a total of 463 abstracts were accepted for presentation and 378 participants took part in 41 oral sessions or in the poster area.
We gratefully acknowledge the financial support for the symposium from the National Natural Science Foundation of China, International Federation for the Promotion of Mechanism and Machine Science (IFToMM), STLE (USA), the State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics (China), China University of Mining and Technology, SAE Magnetics (H.K.) Ltd. (Hongkong, China), NSK Ltd. (Japan), ETT (Eureka Think Tank) (Japan) and Quaker Chemical (China) Co. Ltd. (USA).
The symposium brought tribologists together from industry to academia all over the world for the purpose of sharing their research information and viewpoints. The topics of the symposium included:
Subjects
Organizers
Lubrication
Prof. Yuanzhong Hu (China)
Prof. Jane Wang (USA)
Friction and wear
Prof. Zhongrong Zhou (China)
Prof. Valentin L. Popov (Germany)
Micro/Nano-tribology
Prof. Yonggang Meng (China)
Prof. Dae-Eun Kim (R. Korea)
Tribology of coatings, surface and interface
Prof. Tianmin Shao (China)
Prof. A. Erdemir (USA)
Biotribology
Prof. Shirong Ge (China)
Prof. Zhongming Jin (UK)
Tribo-chemistry
Prof. Weimin Liu (China)
Prof. S. Mori (Japan)
Industry tribology
Prof. Xinchun Lu (China)
Prof. Yongzheng Zhang (China)
We would like to thank all the organizers of the above subjects and the session chairs in the symposium. We also would like to express our great gratitude to Profs. Siwei Zhang, Qunji Xue, Jianbin Luo, Hugh Spikes, and Stven Granick, for their excellent plenary talks, to Profs. Y. Kimura, S. M. Hsu, W. M. Liu, Y. G. Meng, A. Erdemir, and A.G. Wang, for their keynote speeches, to all of the invited presenters and all the participants in the symposium.
In the social programme on Sep. 27, 2008, some participants took a short tour of the Beijing city, which just successfully hosted the 29th Olympic Games and the Paralympics in August and September of 2008. Although the games ended in a splendor of fireworks a few days before the symposium, many participants met the joy, the warm, and the passion of Beijing in their journey. In the afternoon of Sep. 26, more than 100 participants visited the State Key Laboratory of Tribology (SKLT), Tsinghua University, as the first state key laboratory in the field of tribology in China and was established in 1988. Now there are more than 20 full-time staffs, about 20 part-time research assistants, and 70 postgraduate students working on tribology in the laboratory.
The success of the symposium depends heavily on the colleagues and students in SKLT, and many friends who played a role in organization. We would like to thank Profs. Yonggang Meng, Tianmin Shao, Hui Wang, Xinchun Lu, Drs. Xiangjun Zhang, Yu Tian, Qian Zhao, Chenhui Zhang, Haosheng Chen, Jiadao Wang, Dan Guo, Tianbao Ma, and Ms. Yuhua Qi, Ms. Xiaochen Chen, as well as Dr. Aiyang Zhang, Dr. Jingyun Fan, for their great contribution to the symposium. We would also like to thank our student volunteers for their excellent works.
We now look forward to the 6th China International Symposium on Tribology to be held in 2011 in Lanzhou, China.
Shizhu Wen
Jianbin Luo
State Key Laboratory of Tribology
Tsinghua University, Beijing 100084, China
Content
Plenary Lectures
Current Industrial Activities of Tribology in China Siwei Zhang 3
The Fullerene-Like Nanostructure Hydrogenated Carbon Films with Super-Low Friction Qunji Xue, Junyan Zhang 4
Tribology in Nanomanufacturing-Interaction between Nanoparticles and a Solid Surface J. B. Luo, D. Guo 5
Tribology at Small Scales Steve Granick 11
Frontiers of Research in Liquid Lubrication Hugh A. Spikes 12
Keynote Talks
EHL with Grease at Low Speeds Yoshitsugu Kimura, Toshiaki Endo, Daming Dong 15
The Nature of Adhesion and Friction Stephen M. Hsu 20
Space Tribology of China Weimin Liu 21
Active Control of Sliding Friction Yonggang Meng, Yu Tian 22
Superhard and Low Friction Nanocomposite Coatings: Design, Synthesis, and Applications
A. Erdemir, O. L. Eryilmaz, M. Urgen, K. Kazmanli, V. Ezirmik 23
Tribology of Metal-on-Metal Bearings at High Inclination Angles
Reginald Lee, Aaron Essner, Aiguo Wang, Shirong Ge 24
Technical Sessions
Ⅰ. Lubrication
Key Factors to Induce Cavitation-Erosion (Invited) Darong Chen, Jiadao Wang, Haosheng Chen 31
Mechanical and Tribological Properties of TiC-Reinforced HSS-Based Composites with an Interpenetrating
Network for High Temperature Self-Lubrication Applications Yanjun Wang, Zuomin Liu 32
Friction and Wear Characteristics of Advanced Space Lubricants (Invited)
Nobuyoshi Ohno, Sobahan Mia, Shigeki Morita, Shingo Obara 38
Lubrication Analysis of Journal Bearing and Rotor System Using CFD and FSI Techniques
Huiping Liu, Hua Xu, Peter Ellison, Zhongmin Jin 40
Oil Film Behavior under Minute Vibrating Conditions in EHL Point Contacts
Chen Feng, Taisuke Maruyama, Tsuyoshi Saito 42
Different Loading and Motion Applied on Hip Simulators Affects the Lubrication of
Metal-on-Metal Hip Implants Leiming Gao, Fengcai Wang, Peiran Yang, Zhongmin Jin 44
EHD Lubrication of Different Types of Gears Vilmos Simon 46
The Role of Heat Partition in Elastohydrodynamic Lubrication (Invited)
H. P. Evans, A. Clarke, K.J. Sharif, R.W. Snidle 48
Influence of Surface Roughness on Elastohydrodynamic Journal Bearings with Non-Newtonian Lubricants
Chatchai Aiumpornsin, Mongkol Mongkolwongrojn 50
Theoretical Investigation of Journal Bearings with Non-Newtonian Fluids Included Thermal Effects
Mongkol Mongkolwongrojn, Chatchai Aiumpornsin 52
Magnetic Fluid Based Squeeze Film Behavior between Transversely Rough Curved Plates
G.M.Deheri, Rakesh M. Patel, Nikhilkumar D. Abhangi 54
Engine Lubrication System Analysis and Oil Pump Design Optimization Quanbao Zhou 56
Temperature-Dependent Rheology and Tribology of Lubrication Greases Investigated with New Flexible
Platform for Tribological Measurements on a Rheometer J?rg L?uger, Patrick Heyer 61
Study on Characteristic Parameters of Wear Particle Boundary Guobin Li, Delin Guan 64
Viscosity Variation Model and Its Application in Micro/Nano-Scale Clearance
Dong Chun-liu, Zhang Chao-hui, Wang Yan 70
Numerical Solving Method for the Structural Stiffness of Gas Foil Bearings Geng Haipeng, Qi Shemiao, Yu Lie 75
Biotribological Properties of Natural Swine Joint Cartilage Cui Tao, Xiong Dangsheng 81
Effect of Surface Texturing on Lubrication Film Formation within Non-Conformal Contacts
I. K?upka, M. Hartl, R. Poli??uk, M. Vaverka, M. Vrbka, O. ?amánek 84
Experimental Investigation of Time-Dependent Oil Film Pressure in a Dynamically Loaded Journal Bearing
Sun Meili, Xia Chengyong, Wang Xiangang 86
Experimental Research and Numerical Simulation of LY12 and HPb62-2 Ring Compression
Bin Guo, Feng Gong, Chunju Wang, Debin Shan 94
Application of Metal Self-Repairing Additives on Cylinder-Piston Ring Rubbing Pairs
Lei Wang, X. C. Zhou, Q. Q. Li, C. Q. Yuan, X. P. Yan, Y. H. Chen 98
Wettability Study of Multiply-Alkylated Cyclopentanes (MACs) on Silicon Substrates Ying Wang, Mingwu Bai 102
Numerical Analysis on Hydrodynamics of Circular Translational Polishing under Mixed Lubrication
W. Zhai, P. Feng 104
Micro-Tribological Analysis of POM-MoS2-Compounds R. Stengler, S. Schraube, X. G. Hu 109
On Lubrication Characteristics of Dual Tori Double-Enveloping Toroidal Worm Drive
Yaping Zhao, Wenjun Wei, Xuezhu Dong, Jiancheng Zhou 110
Thermoelastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft
Deformation under Load Jun Sun, Jianglin Liu, Changlin Gui 112
Transient Behavior of Elasto-Metal-Plastic Journal Bearing during the Stage of Stop
Jian Jin, Guoxian Zhang, Xiaojing Wang 116
Analyses on the Splashing Parameters of High-Speed Oil Impacted a Wall in Jet Lubrications
Le Gu, Zhenghuan Ye, Liqin Wang, Dezhi Zheng 120
Interferometry Measurement of Spinning Effect on Sliding EHL F. Guo, X. M. Li, B. Fan 122
Effect of Wide Dimples on Planar Contact Lubrication Jiadao Wang, Zhongling Han, Haosheng Chen, Darong Chen 125
Friction Properties and Microstructure of Al-Cu-Fe Nano Films Zhou Xi-ying, Liu Yan-hui, Xu Zhou 127
Tribological Properties of Ti6Al4V Alloy by FOTS Self-Assembled Monolayers Modification Treatment
Sun Changguo, Zhang Huichen 130
Influence of Spinning Effect on the Rolling EHL Films X. M. Li, F. Guo, B. Fan 134
A Study on Lubrication Characteristics between Piston Ring and Cylinder Bore of Bent-Axis Type Piston Pump
Jae-Youn Jung, Ihn-Sung Cho, Il-Hyun Beak, Hyun-Il Shin, Jae-Cheon Jo, Lu Hong 136
The Fabrication and Lubricant Performance of MoS2 Nanotubes Arrays Caihong Sun, Changsheng Li 140
The Research on the Lubricant Aging under Durability Test of the Porous Sliding Bearings
Giemza Boleslaw, Kaldonski Tadeusz, Krol Artur 142
Models for Predicting Friction Coefficient and Parameters with Influence in Elastohydrodynamic Lubrication
P. Lafont Morgado, J. Echávarri Otero, J. B. Sánchez-Pe?uela Lejarraga, J. L. Mu?oz Sanz,
A. Díaz Lantada, J. M. Mu?oz-Guijosa, H. Lorenzo Yustos, P. Leal Wi?a 144
Elastohydrodynamic Film Thickness in Elliptical Contacts with Rolling and Spinning Tae-Jo Park 146
Experimental Study on the Tribological Properties of Pure Powder Lubrication under Plane Contact
Wang Wei, Liu Xiaojun, Liu Kun, Li Hongxian 151
Hydrodynamic Analysis and Experiment Verification of the High-Pressure Small-Flow Centrifugal Pump
Li Bao-liang, Jiang Qin-Yu, Pan Xing-he 153
Effect of Liquid Surface Tension and Viscosity on Micro-Bubble Induced by External Electric Field
Xie Guoxin, Luo Jianbin 155
Study of Water Lubrication in Sliding Point Contact Friction Pairs with Hydrophobic Surfaces
Zhizuo Ma, Chenhui Zhang, Shuhai Liu, Wenshi Zhu 157
A Simplified Numerical Elastic-Plastic Contact Model for Rough Surfaces
Zhanjiang Wang, Wenzhong Wang, Yuanzhong Hu, Hui Wang 159
Film Characteristics of Grease in Point Contact under Micro-Swaying Motion
Li Gang, Zhang Chenhui, Luo Jianbin, Liu Shuhai, Lu Xinchun 167
Effects of Solid Body Temperature on the Non-Newtonian Thermal EHL Behavior in Point Contacts (Invited)
Xiaoling Liu, Peiran Yang 169
Numerical Analysis on Dynamic Characteristics of Flying Magnetic Head with Ultra Thin Spacing
Yao Hua-ping, Huang Ping 171
The Analysis of Higher Guide Bearing Pad Temperature and Its Fault Diagnosis
Mei Gui, Gao Zhi, Liu Ying, Liu Xiangfeng 175
Pitting Life Prediction Based on a 3-D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress
Calculation (Invited) Dong Zhu, Ning Ren, Q. Jane Wang 178
Numerical Lubrication Simulation of Metal-on-Metal Hip Joints: Ball-in-Socket Model and Ball-on-Plane Model
Wenzhong Wang, Fengcai Wang, Zhongmin Jin, D. Dowson, Yuanzhong Hu 180
Deterministic Simulation of Surfaces in Conformal-Contact Lubrication (Invited)
Shangwu Xiong, Chih Lin, Jane Q. Wang, Yansong Wang 182
Simulation and Experimental Validation of the Effect of Surface Texture on Fluid Film Formation
Zhang Jinyu, Meng Yonggang, Le Chengning, Hideki OGATA 184
Marangoni Stress and Its Effects on the Flow in an Evaporating Sessile Droplet Xuefeng Xu, Jianbin Luo 186
Film Forming Characteristics of Oil-in-Water Emulsion with Super-Low Oil Concentration
Ma Liran, Luo Jianbin, Zhang Chenhui 188
A Piston Lubrication Model Considering the Coupling between the Piston Secondary Motion and the
System Inertia Variation in an IC Engine Xiaoxiang Zhang, Zhinan Zhang, Ping Wang, Youbai Xie 191
Analysis of the Combined Effect of the Surface Roughness and Inertia on the Performance of High-Speed
Hydrostatic Thrust Bearing Yang Xuebing, Xiong Wanli, Lü Lang, Hou Zhiquan 197
Study on the Efficiency of the New-Style Reducer with the Green Lubricant
Hu Junhong, Jin Yingli, Guo Dan, Ding Jinyuan, He Weidong 202
Pressure Dependence of the Limiting Shear Stress Coefficient of Liquid Lubricants G. T. Y. Wan, P. L. Wong 206
A Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism:
Self-Pressurizing Thrust Bearings and Non-Contacting Face Seals Wanfu Xu, Bin Geng, Chunjing Shi 211
A Model for the Calculation of the Micro-Pores Number of Compressively Molded Polyimide Porous
Materials Yuping Pu, Jianmin Chen, Peng Zhao, Qunji Xue 216
Frictional Dynamics in a Two Dimensional Frenkel-Kontorova Model with Square Lattice Symmetry
Ju-na Wei, Cang-long Wang, Wen-shan Duan, Jian-min Chen 220
Advances in investigation of Elasto-Aerodynamic Lubrication in Compliant Foil Bearings (Invited)
Lie Yu, Shemiao Qi, Haipeng Geng 225
Normal Stress Effects in Journal Bearing Lubrication with Maxwell Fluid
Li Xiaodi, Chen Haosheng, Chen Darong, Wang Jiadao 231
Ⅱ. Friction and Wear
Analysis of Bearing Outer Ring Creep with FEM Jianjun Zhan, Kinji Yukawa, Hiromichi Takemura 237
Effect of Content of MoS2 on Sliding Tribological Behavior of Copper-Based Powder Metallurgy Materials
under Electrical Current Shangguan Bao, Zhang Yongzhen, Xing Jiandong, Sun Lemin, Hu Daochun, Qiu Ming 239
Research on Frictional Wear Properties of C/C Composite with Electric Current
L. X. Jia, Y. Z. Zhang, J. Li, L. M. Sun, Y. W. Zhao 242
Friction Behavior of C/C-SiC Braking Composites Fabricated by Warm Compacted-in situ Reaction
Zhuan Li, Peng Xiao, Xiang Xiong, Su-hua Zhu 246
Tribological Properties of Hybrid Ag4SiW12O40 Nanoparticles Multilayer Films
Yanbao Guo, Deguo Wang, Siwei Zhang, Yuqi Xiao 250
Study on Fatigue Crack Behavior of Rail in Different Curve Radius Wen Zhong, Wenjian Wang, Qiyue Liu 255
Improvement in Wear Resistance of TiNi Alloy Processed by Equal Channel Angular Extrusion and
Annealing Treatment Z. H. Li, X. H. Cheng 257
Self-Healing of a Soft Primer Coating Caused by Plasticization during Sliding against UHMWPE
Pieter Samyn, Koenraad Bonny, Gustaaf Schoukens 260
Performance of an Infinitely Long Transversely Rough Hydrodynamic Slider Bearing
G. M. Deheri, Chandaniben D. Changela, H. C. Patel, Nikhilkumar D. Abhangi 262
Investigation on Fretting Fatigue Behavior of Ti811 Alloy at Elevated Temperature Xiaohua Zhang, Daoxin Liu 264
Dry Sliding Wear Behavior of a Tribological Couple: Spray-Deposited Al-Si/SiCp Composites/Brake Pads
Teng Jie*, Chen Ding, Chen Zhenhua 268
Wear Behaviors of a Cu-Based Bulk Metallic Glass under Various Gas Atmosphere
G. Q. Zhang, L. N. Wang, H. Z. Liu 270
A Study of the Correlation between Gear Wear and Vibration Cao Yibo, Xie Xiaopeng, Liu Yan, Ding Tianhuai 273
Study on the Relationship between Microstructural Change in Friction-Induced Deformation Layer and
Friction Behavior of Austenitic Stainless Steel Xue Zongyu, Zhou Sheng, Wei Xicheng, Li Jian 278
Abrasive Wear Behavior of Several Metallic Materials under Simulated Sand-Dust Environment
Chunxia Li, Fengyuan Yan 283
Wear Behavior of Plasma-Nitrided 2Cr13 Martensitic Stainless Steel under Air and Vacuum
Yang Jianqun, Liu Yong, Ye Zhuyu, Yang Dezhuang, He Shiyu 285
Sealing Performance and Wear Mechanism of PTFE Oil Seal Ye Zibo, Huang Xing, Liang Rongguang 287
Fretting Corrosion Wear of Synergy between Mechanical and Electrochemical for Biomaterials in Hanks
Balanced Salt Solution Li Ji-wu, A. Iwabuchi 292
Torsional Fretting Behaviors of UHMWPE against Different Counter-Bodies (Invited)
Z. B. Cai, M. H. Zhu, J. Yu, S. X. Qu, Z. R. Zhou 298
An Experimental Study on the Rotational Fretting Wear Behavior of LZ50 Steel
J. L. Mo, M. H. Zhu, Z. J. Liao, Z. R. Zhou 300
Comparative Study of Tribological Properties with Different Fibers Reinforced PTFE/PEEK Composites
at Elevated Temperatures Mu Liwen, Feng Xin, Zhu Jiahua, Wang Huaiyuan, Sun Qingjie, Shi Yijun, Lu Xiaohua 302
Research on Friction Characteristic of End Faces of Mechanical Seals L. Wei, B. Q. Gu, X. Feng, J. J. Sun 304
Failure Mechanism of Hadfield Steel Crossing F. C. Zhang, B. Lv, T. S. Wang, C. L. Zheng, Q. Zou, M. Zhang, M. Li 309
Synthesis and Tribological Behavior of Surface Coated Cu Nanoparticles in Liquid Paraffin
Ling Zhang, Lei Chen, Hongqi Wan, Jianmin Chen, Huidi Zhou 311
Tribological Behaviors at High Load of MoS2 Films in Vacuum
Xinxin Ma, Gang Wang, Guangze Tang, Yong Liu, Shiyu He, Dezhuang Yang 313
Experimental Study on Running-in of Steel Fiction Pair of Block on Disk in Oil with Micro-and-Nano
Diamond Powder X. P. Xie, Z. G. Wang, S. L. Chen 315
Thermomechanical Properties and Tribological Behavior of CaCO3 Whisker Reinforced
Polyetheretherketone Composites Lin Youxi, Gao Chenghui, Chen Minghui 319
Corrosive Fretting Wear Behavior of a Titanium Alloy TC11 in Artificial Seawater
H. Y. Ding, Z. D. Dai, Y. Zhang, G. H. Zhou 322
Investigation on Rolling Contact Fatigue and Wear Properties of Railway Rail
Wenjian Wang, Wen Zhong, Jun Guo, Qiyue Liu 327
Superlubricity Characteristics Using Ceramic Composite Mineral Powder as Lubricating Oil Additive
Yuzhou Gao, Wengang Chen, Huichen Zhang 329
On the Wear-Resistance of Zinc-Based Composites Reinforced by Modified Silicon Phase
Zhao Haofeng, Wang Ling, Wang Wei, Tan Xingxuan, Huang Tingli, Xia Zhengjun, Liu Yanling, Liu Bin 333
On the Wear-Resistance of Low-Alloyed Steel Modified by Inoculants
Wang Ling, Zhao Haofeng, Yan Kai, Liu Bin, Wang Wei, Chen Xi, Qin Qing, Wang Zhigang,
He Jun, Liu Mengyin, Liu Zhigang, Wu Hongyan 336
Research on Worn Mechanism of Disc-Brake Pair Materials for Drilling Rig
X. H. Wang, S. W. Zhang, D. G. Wang, N. Wu 338
Modelling of Self-Lubrication in Frictional Interaction I. G. Goryacheva 344
An Asperity-Contact Based Oxidation Model for Fretting Wear with the Presence of Debris
J. Ding, S. B. Leen, E. J. Williams, P. H. Shipway 346
Rolling Contact Fatigue of Silicon Nitride Balls under Pure Rolling Condition
Zhou Jing-ling, Chen Xiao-yang, Zhang Pei-zhi, Wu Guo-qing 348
Influence of Different External Pressure on the Thermo-Mechanical Coupling of the Rough Surface
during Sliding Contact J. M. Huang, C. H. Gao, Z. Liu 350
Effect of Transverse Surface Topography on Cavitation Erosion Y. Li, Z. Xu, H. Chen, J. Wang, D. Chen 356
The Theory of Debris Group in Ferrographic Analysis Tonggang Liu, Xiaohang Tang, Zhiyi Yang 361
A Method to Monitor Nonferrous Debris in Ferrographic Analysis Liu Tonggang, Liu Shujin, Yang Zhiyi 366
Interaction between Micro-Particales and Bubbles in Cavitation-Erosion of Hydro-Machinery
Wang Jiadao, Chen Haosheng, Xu Yanji, Qin Li, Li Yongjian, Chen Darong 368
Magnetization of Friction Surfaces and Wear Particles under Tribological Processes Alan Hase, Hiroshi Mishina 370
Wear Progress Prediction of Carbide Tool in Turning of AISI1045 by Using FEM
Xie L.-J., Schmidt C., Biesinger F., Schmidt J., Pang S.-Q. 372
Friction and Wear Properties of Fe7Mo6-Based Alloy under the Lubrication of Ethyl-Alcohol
T. Murakami, H. Mano, Y. Hibi, S. Sasaki 376
Seizure of PEEK and Its Composite at High Sliding Velocity in Oil Lubrication T. Akagaki, M. Kawabata 378
Tribological Behavior of Chromium Alloyed Layer Prepared on Surface of TiAl
Zhiyong He, Xiaofeng Wang, Ying Fan, Zhenxia Wang, Xiaoping Liu, Zhong Xu 384
Wear Characteristics under Boundary Lubrication Contacts in Phosphorated Starch Based
Electrorheological Fluids Chul-Hee Lee, Young-Min Han, Jung Woo Sohn , Seung-Bok Choi 386
Abrasive Wear Mechanisms of Multi Component Ferrous Alloys Abraded by Soft, Fine Abrasive
Particles (Invited) De Mello, J. D. B., Polycarpou, A. A. 388
The Analyzes of Mutual Influence of Contact Spots in Sliding Contact of a Periodic Surface and
a Viscoelastic Foundation Lyubicheva A. N. 390
Different Nano-Fillers on the Tribological Properties of PTFE Nanocomposites
Huaiyuan Wang, Xin Feng, Liwen Mu, Xiaohua Lu 392
Study on Surface Passivation Treatment and Tribological Properties of 1Cr18Ni9Ti Stainless Steel in
Hydrogen Peroxide Wang Jihui, Gu Kali, Yuan Chengqing, Sun Xianming, Hu Sheng, Hu Xiaozhong, Li Jian 396
High Speed Tribology: Some Developments on Thermal Behaviors (Invited) Zhang Yongzhen, Qiu Ming 402
Dry Sliding Wear Behavior of Cu-Graphite Composite within a Wide Range of Sliding Velocity
Wenlin Ma, Jinjun Lu 404
Tribological Aspects of Control over Frictional Interaction between Solids in the Presence of Liquid Crystals
S. F. Ermakov, A.V. Mikelionis 406
Effects of the Concentration of Sodium Lauryl Sulfate Solution and NaCl Additive on the
Potential-Controlled Friction Siqing He, Yonggang Meng, Yu Tian 408
Study of Wear and Corrosion Properties of Coated Ionic Liquid
Zhang Xiaohao, Zhang Xiangjun, Liu Yonghe, Mikhail Kosinsky, Imad Ahmed, Stefan Krischok, Juergen A. Schaefer 413
Deformation Behavior of Al-4Cu-2Mg Alloy during Cold Upset Forging
J Babu Rao, Syed Kamaluddin, J Appa Rao, M M M Sarcar, N R M R Bhargava 417
Dry Sliding Wear Behavior of Pure Aluminium and Al-Cu Alloys A Narendra Kumar, R Srinivasu, J Babu Rao 422
Tribological Properties of Spark-Plasma-Sintered Al2O3-SrSO4 Self-Lubricating Nanocomposites at Elevated
Temperatures Yufeng Li, Jiahu Ouyang, Yaming Wang, Yu Zhou, Takashi Murakami, Shinya Sasaki 426
Tribological Behaviors of Some Materials in Sea Water Jianzhang Wang, Fengyuan Yan, Qunji Xue 430
Nanofretting Wear of Monocrystalline Silicon (100) against Spherical SiO2 Tip in Vacuum
Jiaxin Yu, Linmao Qian, Bingjun Yu, Zhongrong Zhou 433
Influence of Surface Finishing Operations on the Reciprocating Sliding Friction and Wear Response of
WC Based Cemented Carbides
K. Bonny, P. De Baets, W. Ost, S. Huang, J. Vleugels, O. Van der Biest, W. Liu, B. Lauwers 435
Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole Composites
Lu Yanhua, Chen Jianmin, Zhou Huida 437
Friction and Wear Behavior of Laser Cladding NiAl/hBN Self-Lubricating Composite Coating
Shitang Zhang, Jiansong Zhou, Baogang Guo, Huidi Zhou, Yuping Pu, Jianmin Chen 442
Research on the Wear-Resisting Material Produced by Vacuum Evaporation Pattern Casting
Jianxiu Liu, Yongjun Liu, Minxin Zheng, Xiangke Ning 443
Effect of Surface Topography on Friction and Wear of Cast Iron for Cylinder Liners
J. Keller, V. Fridrici, Ph. Kapsa, J. F. Huard 447
Wear Resistance Analysis of Hardening Materials for Engine Cylinder Jianmin Sun, Qinghui Zhou, Gequn Shu 449
Effects of Speed Sequence on Friction Properties of Sintered Cu-SiO2
Fei Gao, Rong Fu, Baoyun Song, Yves Berthier 454
The Fluid Dynamic Lubrication between Tooth Surfaces of High Order Contact L. Huran 457
Study on Friction and Wear Behavior of Glass Fiber and Fly Ash Reinforced MC Nylon Composites
S. H. Zhang, G. Chen, C. Cui, C. Mi, F. Tian 460
Experimental Study of Ultrasonic Vibration Assisted Chemical Mechanical Polishing for Sapphire Substrate
Wenhu Xu, Xinchun Lu, Guoshun Pan, Jianbin Luo, Chenhui Zhang 464
Friction and Wear of the Ceramic Coating Formed on Magnesium Alloy
Fei Chen, Hai Zhou, Qingfeng Zhang, Fanxiu Lv 467
Thermal-Mechanical Couple Simulation of Solid Brake Disc in Repeated Braking Cycles
Pyung Hwang, Xuan Wu, Young-Bae Jeon, Qi-Cheng Peng, Hee-Chang Seo 471
Preliminary Applications of King's ART Technology in Industry Ling Chen, Yayue Zhao, Yuansheng Jin 473
Wear Properties of Potassium Titanate Whiskers Reinforced ZL109 Alloy Composites
Wei Zhongshan,Wu Shenqing 475
Mineralogical Mechanochemical Agent Assisted Reconditioning Effects and Mechanism
on Worn Ferrous Surfaces (Invited) Jin Yuansheng, Yang Zhongxue 477
Experiment Research on the Friction Performance of O-Ring with Different Oil Swelling Ratios
Fu Suhong, Liu Jinli, Liu Nan, Ma Jingxuan 479
Friction Behaviors of Bushing in Rolling Contact with Shaft and Electroless Ni-PTFE-P or
Ni-Al2O3-P Coating Dayong Liu, Yiwu Yan, Kalun Lee, Jie Yu 482
Ⅲ. Micro/Nano-tribology
Nano and Micro Indentation and Scratch Tests of Mechanical Properties of Thin Films
Norm V. Gitis, Ilja Hermann, Suresh Kuiry, Jun Xiao 489
Synthesis of Nano-MoS2 Particles and Its Role in the Self-Lubrication of Polyacetal-Based Composite
Xianguo Hu, Kunhong Hu, Yufu Xu, Ralph Stengler 491
Analysis of a Three-Body Contacting Model with the Adhesive Effect Jeng-Haur Horng, Chin-Chung Wei 493
Analysis of Three-Body Contacting Model with Scale Effect Chin-Chung Wei, Jeng-Haur Horng 495
Adhesion, Friction and Wear Measurements at Microscale
N. Myshkin, A. Grigoriev, A. Kovalev, W. Scharff, E. Kovalev 497
Fabrication and Nano-Tribological Behaviors of PDDA/Ag NPs Composite Molecular Deposition Films
Xiao Yu-qi, Wang De-guo, Zhang Si-wei, Guo Yanbao, Gao Mang-lai 499
Frequency Shift of Single Walled Carbon Nanotube under Axial Load
Kan Biao, Ding Jianning, Cheng Guanggui, Wang Xiuqin, Fan Zhen, Ling Zhiyong 503
Effect of Heat Treatment on the Nano-Tribological Properties of Ionic Liquid Films
Wenjie Zhao, Deming Huang, Jibing Pu, Mingwu Bai 505
Analysis on Wafer Tilt Effects in CMP Process Chao-hui Zhang, Zi-cheng Wang, Yan Wang 507
Size Effects on Friction of C3602 in Cylinder Compression Bin Guo, Feng Gong, Chunju Wang, Debin Shan 509
Investigation on the Tribological Characteristics of Nano/Micro Solid Anti-Wear Additives
in Engine Lubricants Zhang Kejin, Wang Dan, Pan Yanchun, Lu Yun, Han Zhiyong 511
The Influence of Carbon Nanotubes on the Tribological Behavior and Wear Resistance of a Polyamide
Nanocomposite B. May, M. R. Hartwich, R. Stengler, X. G. Hu 515
Experimental Investigation of the Frictional Behaviors at Particle-Surface Interfaces in CMP Application
Using an Atomic Force Microscope In-Ha Sung, Hung-Gu Han, Hosung Kong 516
Finite Element Simulation and Analysis of Nano-Scale Adhesive Contacts Liu Yuan, Zhang Xiangjun 518
Nano/Micro-Tribological Properties of Ultrathin Functionalized Imidazolium Ionic Liquid Films
on Silicon Wafer Yufei Mo, Mingwu Bai 520
Micro Asperity Type Induced in Electrostatic Resistance of MEMS Xuejin Shen, Licheng Hou, Xiaoyang Chen 522
Experimental Analysis and Numerical Simulation of the Recess Slider in Magnetic Recording System
with Ultra-Thin Spacing Rongjun Niu, Hongbin Liu, Ping Huang 528
Effect of Solvents on Frictional Properties of Monolayer Lubricant Films Coated on Magnetic Disk
Surfaces (Invited) Hedong Zhang, Yasunaga Mitsuya, Yosuke Fujikawa, Kenji Fukuzawa 531
Fly-Ability and Durability Test of Dynamic Fly Height Heads at 1 nm Clearance
Ning Li, David B. Bogy, Lanshi Zheng, Yonggang Meng 533
Cavitation Erosion Characteristics of Titanium Alloy Thin Film Prepared by Ion Beam
Enhanced Deposition Zhang Huichen, Gao Yuzhou, Zhou Rixue 536
Measurements of Vertical Elongation and Adhesive Force of Nanometers-Thick Lubricant Films
on Magnetic Disks Using Micro Probe for SPM
Yasuji Ohshima, Hedong Zhang, Yasunaga Mitsuya, Masayuki Watanabe, Takashi Sumi, Kenji Fukuzawa 540
Experimental Research on Boundary Slip of Confined Liquids at Micro/Nano Scale and Effect of
Shear Rate and Viscosity Wang Xin, Zhang Xiangjun, Meng Yonggang, Wen Shizhu 542
Study on Micro-Scale Gas Slider Bearing with Direct Simulation Monte Carlo Method
Yanrui Zhang, Yonggang Meng 544
Tribological Behaviors of Self-Assembled Dual-Layer Films in Atmosphere and in Vacuum
Bingjun Yu, Linmao Qian, Jiaxin Yu, Jun Luo, Zhongrong Zhou 546
Research on Fractal Contact Model of Cylinders' Surface Huang Kang, Zhao Han, Chen Qi 548
Friction between Diamond-Like Carbon (DLC) Films-a Molecular Dynamics Study
Tianbao Ma, Yuanzhong Hu, Hui Wang 554
Molecular Dynamics Simulations of Atomic-Scale Friction in Diamond-Silver Sliding System
Pengzhe Zhu, Hui Wang, Yuanzhong Hu 556
Molecular Dynamics Study on Carbon Nanotubes Sandwiched between Si Surface
Li Rui, Hu Yuanzhong, Wang Hui 558
Tribological Aspects of Nanoimprint Process (Invited) Zygmunt Rymuza 560
Molecular Dynamic Simulation of Effect of Crystallographic Orientation on Nano-Indentation/Scratching
Behaviors of BCC Iron Cheng Lu, Yuan Gao, Guillaume Michal, Hongtao Zhu, Nam N. Huynh, A. Kiet Tieu 562
3D Misorientation of Cantilevers and Its Impact in Friction Force Microscopy
Guillaume Michal, Cheng Lu, A. Kiet Tieu 564
Coupled Simulative Analysis for Drive Characteristic of Micro-Comb Structure D. Guo, Y. Zhu 566
Relating Friction and Processes Development during Chemical-Mechanical Polishing (CMP)
Filip Ilie, Tiberiu Laurian, Constantin Tita 571
An Irreversible Thermodynamics Theory for Friction and Wear (Invited) Zhendong Dai 576
Fabrication and Flying Test of Silicon Sliders Jing Lin, Yonggang Meng, Nanhai Song 579
Surface Damages on Silicon Surfaces Created by Large Silica Cluster Impacts:
Molecular Dynamics Simulation Ruling Chen, Jianbin Luo, Dan Guo, Xinchun Lu 582
Silicon Oxide Surface Chemistry and Nano-Tribology (Invited) Seong H. Kim 584
Dynamic Testing for Evaluation of HDI Robustness
Zhi Sheng Deng, Li Zhi Su, Eric Lap Pang Lam, Eric Cheuk Wing Leung 586
Effect of Wall Roughness on Electroosmotic Flow in Microchannels Y. Liu, D. Yang 588
Nanopositioning and Nanomeasuring System: Friction and Its Control (Invited) Yonghe Liu 592
Ⅳ. Tribology of Coatings, Surface and Interface
Fundamentals of Friction and Energy Dissipation (Invited) Yuanzhong Hu 597
The Future of Boundary Lubrication by Carbon Coatings and Environmentally Friendly Additives
Mi de Barros Bouchet , C Matta , J Michel Martin, L Joly-Pottuz 598
Tribological Behavior of Sputtered Boron Carbon Nitride Coatings and the Influence of Processing Gas
Youming Chen, Shengrong Yang, Junyan Zhang 600
Effect of the Prepared Process on Tribological Properties of Multi-Layer Elastomeric DLC Monolayer
Ding Jianning, Cheng Guanggui, Kan Biao, Fan Zhen, Ling Zhiyong 602
Tribology Behaviors of in situ Nanoparticles Doped Molecular Deposition Films
Yanbao Guo, Deguo Wang, Siwei Zhang 606
The Friction Property of Hydrogenated Carbon with Fullerene Microstructure after Annealing
Qi Wang, Chengbing Wang, Zhou Wang, Junyan Zhang 608
Study of Worn Surface Characterization Based on Singular Entropy Li Guobin, Guan Delin 610
An Adaptive Meshless Model for Asperity Thermal Elasto-Plastic Contacts Considering
Temperature-Dependent Material Properties Geng Liu, Zheng Zhang 612
Thermal Oxidized Coating on Surface of Titanium Alloy for Improvement of Tribological
Properties in Vacuum Yong Liu, Zhuyu Ye, Dezhuang Yang, Shiyu He 614
Study on Friction and Wear Properties in Vacuum for γ-Ray Irradiated PTFE Coatings
Yong Liu, Zhuyu Ye, Xingdong Yuan, Dezhuang Yang 618
Friction and Wear Behaviors of Plasma Sprayed Conventional and Nanostructured WC-12Co
Coatings at Elevated Temperature Bin Yin, Yulong An, Huidi Zhou, Fengyuan Yan, Jianmin Chen 621
Wear Behavior of Chromizing-Titanizing Coating Lou Baiyang, Jin Lingchuan, Xu Bin, Yu Keer 623
Preparation and Polishing Performances of α-Al2O3/ Fe2O3 Composite Particles
Qionglin Yan, Hong Lei, Yi Chen, Yuliang Zhu 625
Effect of Gamma Irradiation on Friction and Wear Behavior of MoS2/Graphite Coatings in Vacuum
Jianqun Yang, Yong Liu, Zhuyu Ye, Dezhuang Yang, Shiyu He 630
Preparation of Silica / Alumina Composite Abrasives and Their CMP Behavior on Hard Disk Substrate
Fengling Chu,Hong Lei 633
Friction Properties of Laser Surface Texturing and Molybdenum Alloying Duplex-Treated Ni-Based Alloy
Jianliang Li, Dangsheng Xiong 636
Erosion Characteristic in Ultrasonic Cavitation Experiment Luo Jing, Li Jian 638
Modification Effects of Potassium Titanate Whisker on the Water Absorption and Tribological
Properties of PTFE Composites Jiahua Zhu, Yijun Shi, Xin Feng, Huaiyuan Wang, Xiaohua Lu 640
Influence of the C+-Implantation Dose on the Wetting and Adhesion Properties of Silicon Sufaces
D. G. Wang, D. K. Zhang 642
The Effect of Laser Induced Oxygen-Diffusion Hardening on the Surface Structure and Scratch
Resistance of Commercially Pure Ti Chen Changjun, Zhang Min, Zhang Shichang, Chang Qingming 649
Structure and Tribological Characterization of TiB2/TiBN Multilayer Coatings Deposited by Magnetron
Sputtering W. S. Lin, J. Chen, J. Zhou 651
First Principles Investigation of Water Adsorption on Fe (110) Crystal Surface Containing N
W. Zhao, J. D. Wang, F. B. Liu, D. R. Chen 654
Research on Fabrication and Tribological Properties of Ti-Al Intermetallic Compound Lubricate Film
Zhang Ye, Li Changsheng, Tian Mingxia 658
XPS and SEM Analyses of Self-Repairing Film Formed by Mineral Particles as Lubricant Additives on
the Metal Friction Pairs Wengang Chen, Yuzhou Gao, Huichen Zhang 660
Study on the Characteristics of Transferred Lubricating Thin Films on Ceramic Surfaces Generated in
Liquid Nitrogen Le Gu, Liqin Wang, Dezhi Zheng, Xiaomei Jia 665
Cr17Ni14Mo3 Powder Laser Cladding on 45Steel Substrate
Sun Huilai, Zhao Fangfang, Lin Shuzhong, Qi Xiangyang 667
Microstructure and Tribological Properties of Plasma Sprayed NiCr/Cr3C2 and NiCr/Cr3C2-BaF2CaF2
Composite Coatings Chuanbing Huang, Lingzhong Du, Weigang Zhang 669
Friction and Wear Property of Amorphous Carbon Films Prepared by Ion Beam Assisted Deposition
Rong Sun, Shuhui Yu, Ruxu Du, Qunji Xue 676
Research on Silicon Content and Structure Relationship of Amorphous Si-DLC Films by Molecular
Dynamics Simulations H. Lan, T. Kumagai, T. Kato 678
Effect of Deposition Parameters on Nano-Mechanical Properties of DLC Films by PECVD H. Lan, T. Kato 682
The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves
Hongbin Liu, Rongjun Niu, Yonggang Meng 685
Formation and Crystallization Kinetics of Amorphous Alloys N. Li, C. H. Gao 688
Fabrication and Wear Resistance of Ni-CeO2 Nanocomposite Coatings by Electrodeposition under
Ultrasound Condition Yujun Xue, Jishun Li, Wei Ma, Mingde Duan 695
On the Measurement of Slip Length for Liquid on Super-Hydrophobic Surface
Li Jian, Zhou Ming, Cai Lan, Yang Haifeng, Ye Xia 697
Effect of Plasma Surface Niobizing of γ-TiAl Alloy on Wear Resistance
Xiaoping Liu, Bingying Wang, Zhiyong He, Li Cao 699
Tribological Properties and High-Speed Drilling Performance of Zr-C:H:Nx% Coatings with Different
Contents of Nitrogen W. H. Kao, Y. L. Su, S. H. Yao 701
Tribological Behavior of Sputtered CrAlNbN Hard Coatings at Elevated Temperatures
G. A. Fontalvo, C. Mitterer 703
The Method of Elastic Coatings Diagnostics from Indentation Data E. Torskaya, S. Chizhik, S. Siroezkin 705
The Effect of Electric Field on Adhesion Force with liquid in MIM Structures
Xiong Yi, Zhang Xiangjun, Liu Yonghe, Zhang Xiaohao, Mikhail Kosinskiy 707
Simulation of Friction Composite Behavior Using Heat Treatment
Ji?í Gabry?, Gra?yna Simha Martynková, Yafei Lu, Yuxiong Liu 710
In-situ Microtribology with High Local Resolution
Wolfgang P. Weinhold, Eberhard G. Mueller, Ralph Stengler, Michael Stoll 712
Optimization of Energy Efficiency of Transparent Conducting Oxide Thin Films in the Field of Solar
Cells by Microtribological Rating Jing Yu, Volker Sittinger, Wolfgang P. Weinhold, Carsten Diegelmann 716
Contact Analysis of a Spherical Wear Particle between Elastomeric Seal and Coated Steel Surface
Tae-Jo Park, Hyun-Dong Cho, Yun-Geon Hwang, Hyun-Gi Chung 718
Effect of Particles Size and Morphology of Selected Compounds of Friction Composite on Friction
Performance Karla Barabaszová, Gra?yna Simha Martynková, Yuxiong Liu, Yafei Lu 720
New Technique of DLC Coating Obtaining for Tribology Applications
Chekan N. M., Zhuang Yan, Akulich V. V., Akula I. P., Ladutko E. V. 722
Effect of Spraying Parameters on Microstructure and Thermal Stability of Fe-Based Metallic Glass Coatings
Li Fuping, Li Jinshan, Kou Hongchao, Jiang Chaoping, Xue Xiangyi, Fu Hengzhi 724
Factors Influencing the Fluid-Assisted Surface Cracking under Rolling-Sliding Contact Loading
J. Wang, S. Ioannides, J. Lai 726
Microstructure, Phase and Microhardness Distribution of Laser Deposited Ni-Based Amorphous Coating
Jiang Chaoping, Li Jinshan, Kou Hongchao, Dai Jiangbo, Xue Xiangyi, Fu Hengzhi 728
Friction Modifiers Optimization of the Ceramic Composites for Automotive Applications
Gra?yna Simha Martynková, Karla Barabaszová, Pavla Thorová, Yafei Lu 730
Friction and Wear Behaviors and Rolling Contact Fatigue Life of TiN Film on Bearing Steel by Plasma
Immersion Ion Implantation and Deposition Technique Hongxi Liu, Yehua Jiang, Rong Zhou, Baoyin Tang 732
Connectivity Characterization of 3D Surface Topography Based on Mathematical Morphology
Liu Xiaojun, Liu Kun, Wang Wei, Gui Changlin 734
Effect of Microstructure on the Friction Properties of the Electroless Ni-P Deposit
Y. H. Cheng, Y. Zou, L. Cheng, W. Liu 736
Erosion Behaviors of Elastic Polymer Coatings Zhong Ping, Liao Youwei, Yuan Chengqing, Li Jian 738
Mechanical Properties of the TiAlSiN Coatings by Post Heat Treatments
Wei-Yu Ho, Chi-Lung Chang, Chih-Wei Chen, Chun-Nane Chen, Li-Wei Shen, Chi-Chun Hwang 742
In-situ Measurements of Surface Temperature Fields on Ring-Block Contact Surface under
Friction Using an Infrared Thermography Tao You, Jianwei Yu, Xiaofen Yu 744
Research on the Preparation, Characterization and Tribological Properties of Ultra-Thin
Self-Assembled Monolayers on the Magnetic Head Surface Hu Xiaoli, Zhang Chenhui 748
Super-Hydrophobic and Self-Lubricating Carbon Coating on Ti3SiC2
Jian Sui, Yanjie Zhang, Shufang Ren, Monika Rinke, Jinjun Lu 750
Corrosion Protection of Ultra-Thin Diamond-Like Carbon Films on Cuprum
Min Zhong, Chenhui Zhang, Jianbin Luo 752
SEM and AFM Study on Nanoparticles Used as Lubricating Oils Additives Gu Zhuoming 754
Study on Wear Model for Piston Ring and Strengthened Cylinder Wall of Engine Jianmin Sun, Haiqiao Wei 756
State of the Art in Laser Surface Texturing (Invited) Izhak Etsion 761
La2O3 Effect on Microstructure, Mechanical and Tribological Properties of Ni-W Coatings
Baolei Han, Xinchun Lu 763
A Comparative Study of Growth Process and Tribological Behavior between Single Component and
Mixed Alkylsilane Self-Assembled Molecular Films X. K. Wang, Y. H. Liu, J. B. Luo, X. C. Lu 765
The Effect of Surface Morphology on the Friction Behavior of HF-CVD Diamond Films
Bin Shen,Fanghong Sun 770
Particles Detection and Analysis of Hard Disk Substrate after Post-CMP Cleaning
Yating Huang, Xinchun Lu, Guoshun Pan, Bill Lee, Jianbin Luo 772
Hard Wear-Resistant Coatings: A Review T. Hoornaert, Z. K. Hua, J. H. Zhang 774
The Cavitation Erosion of the Mild Carbon Steels Implanted with Titanium and Nitrogen
Liu Fengbin, Wang Jiadao, Chen Darong, Xu Yanji, Zhao Ming 780
Research of the Pits Induced by MnS Inclusions at the Incipient Stage of Cavitation Erosion
Jiang Nana, Liu Shihan, Chen Haosheng, Wang Jiadao, Chen Darong 782
The Water Wettability of the Hydrogenated and Oxygenated Diamond Films
Wang Jiadao, Liu Fengbin, Chen Darong 785
Investigation on the Effect of Transverse Grooves on Friction Force
Zhou Gang, Wang Jiadao, Chen Haosheng, Chen Darong 787
Research for Forming Mechanism of Benard Coating Shaped Bi-Unit Composite Structure
Zhaoliang Dou, Jiadao Wang, Haosheng Chen, Darong Chen 791
Microstructure and Mechanical Properties of TiCN Coatings Prepared by MTCVD
Zhengbing Qi, Peng Sun, Zhoucheng Wang 796
Erosion-Wear Behavior and Mechanism of HVAS Coatings Y. H. Han, L. Li 801
Tribological Properties of Textured Ti Coating Prepared by Masked Deposition Yuanyue Zhang, Tianmin Shao 804
A Method of Micro Laser Surface Texturing Based on Optical Fiber Focusing
Yiqian Zhou, Tianmin Shao, Liang Yin 806
Application of Laser in Surface Technology-An Overview of the Research Work Performed
in SKLT (Invited) Tianmin Shao 807
Influence of Heat Treatment on Hardness, Elastic Modulus and Bonding Strength of Ti/Ta/TiN/TaN
Nanomultilayer Coatings H. F. Gong, T. M. Shao 808
Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole
Yanhua Lu, Jianmin Chen, Haixia Cui, Huidi Zhou 812
Diamond-Like Carbon Thin Films Deposition on Glass Using an Electron Cyclotron Resonance (ECR)
Microwave Chemical Vapor Deposition (CVD) System
Guangan Zhang, Liping Wang, Pengxun Yan, Junyan Zhang 816
Ⅴ. Biotribology
The Biotribological Behavior Researches on the α-Tocopherol Doped and Gamma-Irradiated UHMWPE
Ni Zifeng, Ge Shirong 823
The Effects of Protein and pH on the Tribo-Corrosion Performance of Cast CoCrMo-A Combined
Electrochemical and Tribological Study D. Sun, J. A. Wharton, R. J. K. Wood 825
Biotribological Properties of Carburized Titanium Alloys Yong Luo, Shirong Ge, Zhongmin Jin, John Fisher 827
Effect of Corrosion and Biofilm on Friction Behavior in Biotribocorrosion System for Metal-on-Metal
Hip Prosthesis Yu Yan, Anne Neville, Duncan Dowson, John Fisher, Sophie Williams 829
A Microscopic Model for Pedestrian Slips Caused by Particle Contamination
Hung-Jung Tsai, Hung-Cheng Tsai, Pay-Yau Huang, Chih-Hsiang Liao 831
Elastohydrodynamic Lubrication of Aspherical Metal-on-Metal Artificial Hip Joints
Qingen Meng, Leiming Gao, Feng Liu, Peiran Yang, Fisher John, Zhongmin Jin 833
Long-Term Contact-Coupled Wear Prediction for Total Metal-on-Metal Hip Joint Replacement
Muhamad Noor Harun, Zhongmin Jin, Fengchai Wang, John Fisher 835
The Molecular Orientation Induced by Multi-Directional Sliding in the UHMWPE Used for the Artificial
Joint Replacements Lu Kang, Eric Lewis, Jagan Mohanraj, Tom Brown, David Barton, Zhongmin Jin, John Fisher 837
Radial Displacements in a Thin Semi-Spherical Layer of Biphasic Articular Cartilage for Use in EHL
Models of Natural Hip Joints A Félix Qui?onez, J Fisher, Z M Jin 839
Investigations of the Sliding Friction Behaviors of Locusts on Slippery Trapping Plate
Wang Lixin, Zhang Xin, Zhou Qiang 841
Tribology of Sequentially Irradiated and Annealed UHMWPE with and without Impingement
Aaron Essner, Lizeth Herrera, Reginald Lee, Jason Longaray, Aiguo Wang 843
Study on UHMWPE Carrying Estradiol to Treat the Particle-Induced Osteolysis
Shuxin Qu, Aiqin Liu, Xiaomin Liu, Shengfu Li, Jie Weng, Zhongrong Zhou 845
Friction and Wear Characteristics of UHMWPE Studied by Orthogonal Method
Wu Gang, Zhao Chunhua, Zhao Xinze 847
Wear Mechanism of Sliding Tracks between Femoral Head and Acetabular Cup of Artificial Joint
Wang Shibo, Wang Qingliang, Ge Shirong, Zhang Dekun 851
Dynamic Contacting Characteristic of Natural Articular Cartilage under Reciprocating Sliding
Qian Shanhua, Ge Shirong 853
Application of Principal Component Analysis and Fuzzy C-Means Clustering Algorithm to
the Classification of UHMWPE Wear Debris from Artificial Joints
J. P. Wu, X. P. Yan, C. Q. Yuan, X. C. Zhou, Z. Jin, J. L. Tipper 855
Numerical Surface Characterization of Wear Debris from Artificial Joints Using Atomic Force Microscopy
C. Q. Yuan, X. P. Yan, Z. Jin, J. L. Tipper 857
A Novel Propelling Mechanism Based on Frictional Interaction for Endoscope Robot
Young-Tae Kim, Dae-Eun Kim 859
Study on the Release of Estradiol form UHMWPE Loading Estradiol Wear Debris in vitro
Xiaomin Liu, Aiqin Liu, Shuxin Qu, Xiaohong Li, Linmao Qian, Zhongrong Zhou 861
A New Method to Simulate Wear within the Patellofemoral Joint of TKR
P. Ellison, D. C. Barton, Z. M. Jin, J. Fisher 863
Modification and Tribological Study on Implant Polymers of Hip Prosthesis Maoquan Xue 865
Dynamic Contact Model of Bio-Adhesive Pads of Animals: Simulation Experiments
Xiong Yi, Xiangjun Zhang, Imad Ahmed, Michael Kosinsky, Yonghe Liu, J Schaefer 867
Examination of Biolox(r)delta from Serum Lubricated Reciprocating Sliding Wear L. Ma, W. M. Rainforth 869
Lubrication of Synovial Joints (Invited) Zhongmin Jin 871
Ⅵ. Tribo-chemistry
Mechanism and Applications of Chemical and Mechanical Polishing (Invited)
Xinchun Lu, Guoshun Pan, Jianbin Luo 875
Tribological Performance of Biomass-Oil from Straw Product
Xianguo Hu, Qiongjie Wang, Yufu Xu, Xifeng Zhu 876
Extreme Pressure Properties and Mechnism of Bismuth Naphthenate with Sulfur Containing Additives
Huanqin Zhu, Jianqiang Hu, Yongguo Zhang, Yiwei Fei 878
Synthesis and Tribology Properties of Stearate Coated Ag Nanoparticles
Lei Sun, Xiaojun Tao, Pingyu Zhang, Zhijun Zhang 880
Filtrate Reducer Activity and Antiwear Behavior of Drilling Fluid Doped with an Non-Conventional Additive
Wei Danping, Geng Zhiyong, Liu Xiaoyu, Yan Lili, Wang Chengbiao 882
Utilization of Industrial and Agricultural Wastes as a Source of Lubricants, Additives and Fuels Wei Danping 884
Effect of Tribochemical Reaction on Friction and Wear of DLC under Lubrication with Ionic Liquids at
High-Vacuum Condition (Invited)
Shinya Sasaki, Tsutomu Yagi, Hiroki Mano, Koji Miyake, Miki Nakano, Takao Ishida 886
Tribochemical Reaction of Ionic Liquids on Sliding Metal Surfaces
Tsutomu Yagi, Shinya Sasaki, Hiroki Mano, Koji Miyake, Miki Nakano, Takao Ishida 888
The Tribological Properties of Oil-Soluble Nano-Copper and Nano-Silica Particles as Additives of
Lubricating Oils Jingjing Huang, Xiaohong Li, Zhijun Zhang 890
Preparation and Tribological Properties of Monodispersed Metallic Cu-Sn Alloy Nanoclusters with
Modified Surface Tao Zhao, Rong Sun, Shuhui Yu, Ruxu Du, Zhijun Zhang 892
Tribological Studies on a Novel Borate Ester Containing Benzothiazol-2-yl and Disulfide Groups as EP
and Multifunctional Additive Yonggang Wang, Jiusheng Li, Tianhui Ren 894
Tribological Behavior of AZ91D Magnesium Alloy against SAE52100 Steel under Ionic Liquid
Lubricated Conditions Yanqiu Xia, Zhengfeng Jia, Junhong Jia 896
Tribological Characteristics of Magnesium Alloy Using BN-Containing Additives under Boundary
Lubricating Condition Zhengfeng Jia, Yanqiu Xia, Weimin Liu, Bin Li 899
Synthesis of YPO4 Nanoparticals vis Microemulsion Method and Its Friction Properties of
Lubricating Oils Limin Zhao, Xin Shao, Yibin Yin, Wenzhi Li 903
A Protective Coating Formed in-situ on the Cylinder Bore in Presence of Mg6Si4O10(OH)8
Zhongxue Yang, Yuansheng Jin 905
Chemical Mechanical Polishing of Copper in Organic Phosphonic Acid System Slurry
Zhang Wei, Lu Xinchun, Liu Yuhong, Pan Guoshun, Luo Jianbin 906
Chemical Mechanical Planarization of Copper Using Ethylenediamine and Hydrogen Peroxide
Based Slurry Ping Liu, Xinchun Lu, Yuhong Liu, Jianbin Luo, Guoshun Pan 908
Rheological and Tribological Characteristics of Chemically Modified Rapeseed Oil
Li Qinghua, Tao Dehua, Zhang Jianhua, Mo Yunhui 912
Research on Friction-Coatings with Activated Ultra-Thick Tin-Base
Mo Yunhui, Tao Dehua,Wei Xicheng, Li Qinghua 915
Surfactants Lubricating Oil Additives (Invited) S. Plaza, L. Margielewski 920
Ⅶ. Industry Tribology
Efficient Tribology Testing of Lubricating Oils with Nano-Additives Norm V. Gitis, Jun Xiao 925
Manufacture and Characterization of C/C-SiC Fabricated by Warm Compacted-in situ Reacted Process
Li Zhuan, Xiao Peng, Xiong Xiang 926
Experimental Investigations on Relationship between Sorptive Properties, Surface Tension, Contact Angle
and Lubricity of Engine and Gear Oils Tomasz Jan Kaldonski, Tadeusz Kaldonski 928
The Latest Technology of Traction Drive Half-Toroidal CVT Daping Liu, Takashi Imanishi 930
Long Life Bearing Technologies on Material Aspect Peng Xiangduo, Yasuyuki Shimizu, Nobuaki Mitamura 932
Fault Diagnosis of Gear Using Oil Monitoring Samples and Vibration Data
Cao Yibo, Xie Xiaopeng, Liu Yan, Ding Tianhuai 934
Prediction of Static Performance of Bump-Type Foil Bearings and Validation Kai Feng, Shigehiko Kaneko 940
Study on Condition Monitoring in Petrochemical Equipment Using Oil Analysis Technology
Xiaopeng Xie, Wei Feng, Qiansheng Liao 942
Dynamic Mechanical Properties of Polymer-Lining and Their Effect on Coefficient of Friction
Yuxing Peng, Zhencai Zhu, Guoan Chen 947
Machine Condition Monitoring and Remaining Life Prediction Using Integrated Approach
S. Ebersbach, Zhongxiao Peng, Chengqing Yuan, Xinping Yan 949
Study on Condition Characteristics of Tribo-System and Its Description Method
Xinping Yan, Chengqing Yuan, Xincong Zhou, Xiuqin Bai 957
Study of Tribological Faults and Their Prevention Approaches in Dredger
X. P. Yan, Y. H. Chen, A. N. Li, C. Q. Yuan 961
Elastohydrodynamic Lubrication and Asperity Contact Simulation of Engine Main Bearing with Flexible
Rotating Crankshaft and Flexible Engine Block Liang Chen, Xigeng Song, Dongxin Xue, Zhangjie Ming 967
Tribology Extenics Condition Evaluation Based on Case Reasoning
Zhao Chunhua, Yu Zhiqiang, Zhao Xinze, Wu Gang 973
Effect of Surface Material on the Cavitation Erosion Noise: Experimental Investigation
Ge Han, Chen Haosheng, Chen Darong, Yan Dayun 977
Research on Mechanism of Casing Wear in Sliding-Impact Wear Condition
Fan Jianchun, Zhang Laibin, Chun Shengli, Yu Huiyuan 980
Durability of Phosphorated Starch Based ER Fluid under Damper C. H. Lee, J. W. Sohn, Y. M. Han, S. B. Choi 983
Effect of Different Atmosphere on Dry Friction Behavior of Steel Sliding against Brass at High Speed
Qiu Ming, Zhang Yongzhen, Du Sanming , Shangguan Bao 989
A Study on the Application of a Mineral Additive in Lubricating Oil for Cylinder Liner
Yue Wen, Wang Chengbiao, Huang Haipeng, Wen Qingfeng, Liu Yuandong, Liu Jiajun 991
Effect of Ingredients in Slurry Containing Alumina on Polishing of Hard Disk Substrate
Jiazhen Sun, Guoshun Pan, Yan Zhou, Yonghua Zhu, Jianbin Luo, Xinchun Lu, Yan Liu 993
Study on Dispersion Stability and Self-Repair Principle of Ultrafine-Tungsten Disulfide Particulates
Shi Chen, Mao Daheng 995
Research on Micro-Abrasion Performances of TiN Coating in Simulated Body Fluid
Weijiu Huang, Guo Wang, Zhaofeng Li 1000
Micro-Abrasion-Corrosion of Ti6Al4V Alloy in Simulated Artificial Hip Joint Environments
Weijiu Huang, Guo Wang, Ziqin Zheng 1005
Chemical-Mechanical Polishing of NiP Alloy for Hard Disk Drive Substrates
Weiming Lee, Zuqiang Qi, Wanjia Lu, Jianbin Luo 1011
The Material Removal Rate of Metal Polishing Process Yeau-Ren Jeng, Pay-Yau Huang 1013
Tool Life Modelling for High-Speed Milling Wu Delin, Zhou Yunfei 1015
Nano-Scratching-Induced Damages and Their Effect on Fracture Properties of a Single Crystal Sapphire
Yufu Liu, Y. Kagawa, K. Shiraki 1017
Interfacial Forces in Chemical-Mechanical Polishing (Invited) Dedy Ng, Hong Liang 1019
Influence of Water on the Tribological Behavior of Collector Materials against Railway Contact Wires at
High Sliding Speeds L. M. Sun, D. C. Hu, B. Shangguan, Y. Z. Zhang 1020
Index of Authors 1025
Technical Sessions-Proceedings of CIST2008 & ITS-IFToMM2008 Beijing, CHINA
Content
2
1
Preface
Preface
II
III
Content
Content